Дріерит Осушувач Повітря Осушувач
video

Дріерит Осушувач Повітря Осушувач

Using of the drying machine itself unique micro adsorption of moisture in the air by capillary action Pressure relief, adsorption and desorption temperature to remove moisture absorption heat.The equipment is generally double cylinder form, under the control of the programmer work alternately, one adsorption another a desorption and regeneration, continuous loop.
Послати повідомлення
Введення продукту

Дріерит Осушувач Повітря Осушувач

Air ємність range:0.5-600Nm3/min ,working pressure range:0.6-1.6Mpa,dew point:-20~ -70} degree ,

 

Робота Принцип %3а
The мокрий стислий повітря is від the метелик клапан 1 to the bottom of the tower A from the air inlet,Through the diffuser,The стисне повітря enters smoothly into the tower A,flowing through the dry bed,Moisture is absorbed,Make pressure dew point point reduced to - 40} ºC,Dry стисне повітря потоки від the top of the tower A,through the check butterfly valve C1 to enter the point of використання з стиснене повітря. У той час адсорбування вежа A, the Tower B regenerates the адсорбент. At this point, the moisture content of the adorbent in tower B is saturated,drain pressure in the tower to one atmosphere by dropping valve 4,5 and muffler OS. Після зниження тиск,Повітря Blower BL starting,entering into the атмосфера,Нагрівання вгору через обігрівач EH,The адсорбент in the tower B is regenering, the air is heated between 120 ºC to 180 ºC.Hot air enter into Tower B,When flowing through the абсорбент bed, the water is released from the surface of the adsorbent, and into the air, the heated regeneration air are released into the atmosphere by the butterfly valve 4,5 and muffler OS. Після нагрівання стадія, The адсорбент is regenerated, but адсорбент температура is still high, before адсорбування the стиснений air, must be to reduce the температура, in order to get the optimal adsorption effect. The equipment is cooled by a water-cooled HT after cooler rather than a dry finished product, thus saving energy. In the process, through a series of matching Application of the valve, the Blower and the tower B form a closed loop, avoid heaters, flow through the after cooling, the blower cooling down the air into the tower B, the cooling air through the adorption takes the heat away. And then enter the standby and voltage-sharing of Tower A , then the two towers at the same time adsorption for some time, the last two towers auto switch to the next cycle.
 



Модель
Повітря ємність
(мм3/min)
Air роз'єм dia Обігрівач потужність(KW) Вентилятор потужність(KW) Десикант вага (кг) Сушарка нетто вага
(кг)
Сушарка розмір
(мм)
Охолодження вода циркуляція M³/h
SDXG-15PB-I 16 DN65 10 2.2 486 1100 1600×1480×2419 1.2
SDXG-20PB-I 22 DN65 12 5.5 606 1500 1650×1604×2442 1.2
SDXG-25PB-I 26.8 DN80 15 5.5 716 2000 1800×1757×2564 1.6
SDXG-30PB-I 32 DN80 18 5.5 860 2200 1800×1781×2544 2.2
SDXG-40PB-I 43.5 DN100 22 7.5 1158 2300 2060×1862×2657 3.3
SDXG-50PB-I 53 DN100 27 9 1422 3000 2170×2009×2726 3.3
SDXG-60PB-I 67 DN125 36 9 1608 4200 2546×2199×2831 5.5
SDXG-80PB-I 90 DN125 42 9 2436 5400 2600×2317×2940 5.5
SDXG-100PB-I 110 DN150 54 13 2926 6100 3250×2432×3087 9
SDXG-120PB-I 130 DN150 72 13 3476 8100 3350×2512×3153 9
SDXG-150PB-I 160 DN200 84 13 4710 11600 3800×2742×3428 9
SDXG-200PB-I 210 DN200 96 18.5 7008 16000 4700×2578×3532 16

Примітка:Design conditions: working pressure: 7bar, inlet temperature: 38ºC, pressure dew point: -20ºC

 

 

Товар характеристики

 

Висока ефективність і енергозбереження;

Робота тиск роса точка -20ºC~-40ºC;

Оснащений з ПЛК контролер з відмінною продуктивністю, який може реалізувати ланцюг функція;

Висока якість комутація клапани, стабільний і надійний, can ensure the цілісність of the work process and prolong the working life of components;

Вибір Спеціальний адсорбенти з високий гігроскопічний рівномірний форма і розмір, високий міцність, низький вихід роса точка, less dust generated, and long service life

 

Наші Сервіс

 

01. Pre-sale: The main responsibilities of the sales and Research Institute are to review the the technical and business solutions, provide business and technical support to customers, and can accurately and conlyly solve all business and technical requirements before sales.

02. On sale: The main responsibilities of the Ministry of Commerce are order management and customer management. The core of order management is order delivery, business review of the scheme, and order. Timely solve the problems in the execution of the contract, and commun with customers in order processing and delivery.

03. Післяпродажне обслуговування: Strong and perfect after-sales service network, there are 9 customer service centers in major regions of China, each center has professional service engineers, a total of more than 50 people, fast and timely solve problems in after-sales service, uch equipment start-up debugging, and troubleshooting.

 

Якщо ви потреба, будь ласка відчувайте вільний to contact us for more information. Email: shanli@hzsljh.com

 

FAQ

 

Q1. Є ви а трейдинг компанія або виробник?

A: We are arly 30 years professional manufacturer specializing in air dryers.

І ми торгівля наша продукція з наш клієнтами безпосередньо.

Q2. Can you do OEM and ODM?

A: Yes, OEM and ODM are both acceptable.

Q3. Як про післяобслуговування?

A: We have 9 offices in China and also have an over after-service team.

 

Фабрика Тур

 

Types of Air Dryer 30 Years Manufacturer

 

Популярні Мітки: дріерит осушувач повітря сушарка, Китай дріерит осушувач повітря сушарка виробники, постачальники, завод

Послати повідомлення

whatsapp

Телефон

Електронна пошта

Розслідування